Vibrating Feeders; they are generally used to feed rock to primary crushers. Vibro Feeders; It is used for all kinds of feeding, stock, intermediate stock and truck loading, Vibro motor is used in the Drive System, It can even feed from 4 directions at the same time. (This application is used for products of 30m³ and above) Bunker production is made in the desired size. Standard types for intermediate stock and intermediate feeding (15–20–25–30 m³). Standard types for truck loading bunkers are (45-60-100-125 m³). Flow surfaces of the material are covered with stone lining and there is no wear on the body sheet. hardly enough. Feeding can be adjusted very easily from the feeder cover and vibro motors.

These are the units that feed the raw material coming out of the quarry to the primary crushers. All kinds of trucks produced in the world have a hopper with a volume and strength that they can feed. Vibrating feeders have a hopper and chassis that are strong enough to take the impact of the raw material discharged from the truck. They have a chamber starting from 8 m3 up to 100 m3. With 2 vibromotors imported from world-renowned companies, the main vibration body makes linear vibration. The vibration body sits on a very solid chassis with coil springs of sufficient number and ripple. In the grilled section in front of the feeder trough, the soil in the run-off material can be separated. The bottom and sides of the feed trough for abrasive material are coated with a wear resistant lining.

Features and Benefits
– Very low maintenance and very low operating costs
– Simple drive system
– Very solid carrier chassis
– High capacity, easy capacity change with frequency converter
– High chamber volume
– Mesh section with adjustable opening consisting of heavy-duty, wear-resistant grates.