GEL PAINT REMOVER
NSN Number:8010270492742
Properties : Epoxy on the surface of all kinds of metals and alloys,
It is a gel-format product used to dissolve polyurethane, synthetic, cellulosic and similar paints.
Special emulsifiers, wetting agents and corrosion inhibitors in MT-Stripper Gel
paint on aluminum, iron, magnesium and their alloys from the surface with the help of
they clean. In terms of the compounds it contains, it contains phenol, nitrite, ammonia, chromate, etc. chemicals.
does not contain. The product has been produced in accordance with MIL-R-81294 D, TYPE 1, CLASS 2A standards.
Areas of Use: Paint on surfaces, especially in aircraft, helicopter and tank industries.
It is a gel-like chemical with a suitable structure used for cleaning.
On the parts;
a) Carbon,
b) Lacquer,
c) Varnish,
d) Rubber,
e) It dissolves all coatings such as paint.
Application: MT-STRIPPER GEL can be used with brush or roller. Paint removal
It is applied to the desired surface and waited between 30 minutes and 60 minutes depending on the paint thickness. Then paint from the surface
taken by scraping. Paint residues are removed from the surface by rinsing with pressurized or normal water.

Usage values:
Concentration: Used pure.
Temperature : not required
Time: 30 min. – 60 min (cleaning time according to the density of the paint)
may vary.)
After the process, it is washed with cold or hot water, if possible, with the help of a pressurized equipment.
Necessary precautions should be taken against corrosion, especially while waiting for the steel parts to be washed.
Physical characteristics:
Appearance : gel, homogeneous, yellow color
Viscosity (20 rPm) cPs : < 5000
Volatility: less than pure water
Drying time: Does not dry on the surface for 1 day
Corrosion effect on metals : Does not cause corrosion
Fragrance : own natural scent

PRODUCT ADVANTAGES:
1. The product does not contain nitrite, ammonia, phenol and chromate.
2. The product is used pure, no need for mixing or dilution.
3. Evaporation is low.
4. It can be easily rinsed with hot or cold water.
5. It produces chemically clean surfaces.
Packaging: 20 kg. tin or 200 kg barrels.
Storage Conditions: It is not used in chemical flammable, combustible places, fire-producing units and
It should not be stored together with oxidizing chemicals.
It should be stored in a closed warehouse (+4; +250 C) temperature range.