Flange profiles used at the joints of air ducts are designed to provide maximum strength, impermeability and ease of assembly. It is suitable for A, B, C pressure classes.

It is used to stick acoustic insulation, polyethylene and rubber insulation to pipes and ventilation duct installations. It is an alternative product to rubber-based adhesive groups.

PLASTIC CLAMP is a multi-purpose fastener specially designed to be used in flexible air duct assemblies. It is a more economical alternative, although it cannot provide a strong and solid assembly as metal clamps.

It is used in the joints of polyethylene and rubber foam insulation materials, in the repair of damaged insulation materials.

Duct gasket is used as a sealing in duct flange systems against external factors such as water, dust, smoke, noise, oil.

It is used at the joints of rubber foam pipe and sheet insulation materials, insulating valves and installations with difficult cross-sections, insulating short-length pipes and repairing damaged insulations.

It is a Non-Flammable Polyurethane foam reinforced with a non-combustible mineral substance. It never melts, does not catch fire and does not form flowing droplets. The walking speed of the flame in the sponge is 0 mt/sec.

It is an elastomeric rubber-based insulation material in the form of sheet and pipe with closed-pore, smooth cell structure, produced to provide heat insulation and condensation control. It has high thermal insulation value.

It is an elastomeric rubber-based insulation material in the form of sheet and pipe with closed-pore, smooth cell structure, produced to provide heat insulation and condensation control. It has high thermal insulation value.

It is an elastomeric rubber-based insulation material in the form of sheet and pipe with closed-pore, smooth cell structure, produced to provide heat insulation and condensation control. It has high thermal insulation value.

It is used to fix pipes, sprinkler systems and profiles to steel profile building constructions. It can be applied with M8 and M10 rods.

Suspension elements are used together with rods. It is used as a hanger element in transport and hanger systems. It reduces the vibration created by pressure and speed in the air duct with its vibration receiver rubber.

Easy screw (drill-tipped screw) measuring 3.9×13 mm and 3.9×16 mm is used for mounting the ventilation duct flange.

Thanks to the flaps opened on the sides, it fits perfectly into the hole. High tensile strength Zinc hearted against corrosion (5-10 micron)

Corner elements are produced with a width of 20,25,30,35 mm in accordance with the flange. The purpose of the corner elements is to complete the flange connections without error, to prevent air leakage from the duct corners during duct stretching and to increase the duct strength.

There are two types, plain and reinforced. Our reinforced tape is square and diamond patterned. It is suitable for use in the insulation of high pressure metal alloy ventilation ducts.

It is an elastomeric rubber-based insulation material in the form of sheet and pipe with closed-pore, smooth cell structure, produced to provide heat insulation and condensation control. It has high thermal insulation value.

It can be produced in the form of mattresses, sheets, pipes. Usage temperature is between -50 / +250°C. It provides fire safety together with heat insulation, sound insulation and acoustic arrangement. It does not deteriorate over time, does not rot,

It can be produced in the form of mattresses, sheets, pipes. Usage temperature is between -50 / +250°C. It provides fire safety together with heat insulation, sound insulation and acoustic arrangement. It does not deteriorate over time, does not rot,

It can be produced in the form of mattresses, sheets, pipes. Usage temperature is between -50 / +250°C. It provides fire safety together with heat insulation, sound insulation and acoustic arrangement. Does not deteriorate over time

It can be produced in the form of mattresses, sheets, pipes. Usage temperature is between -50 / +250°C. It provides fire safety together with heat insulation, sound insulation and acoustic arrangement. Does not deteriorate over time

It can be produced in the form of mattresses, sheets, pipes. Usage temperature is between -50 / +250°C. It provides fire safety together with heat insulation, sound insulation and acoustic arrangement. It does not deteriorate over time, does not rot,

It can be produced in the form of mattresses, sheets, pipes. Usage temperature is between -50 / +250°C. It provides fire safety together with heat insulation, sound insulation and acoustic arrangement. Does not deteriorate over time

Silicone oil reinforced acrylic sealant used for filling and insulation in ventilation ducts, door and window joinery (PVC, metal wood) and wall cracks.

Special design for heating, cooling, ventilation systems, industrial air transfer systems and dust transfer systems.

M8x20mm, M8x25mm, M10x25mm and M10x30mm bolts are commonly recommended for air duct mounting.

DIN 975 Metric Threads 2 and 3 Meters-Metric Threads Dimensions: M5-M48 //1/4″-2″

Please contact us for technical details.

Please contact us for technical details.

It is used as a support and connection element in horizontal and vertical pipe hanger mounting, fixing ventilation ducts, pipe hanging systems.

It is used as support and fasteners in external cladding, electrical installations, pipe suspension systems.

It is used for flange fixing in C and D (high) pressure classes.