What is AG Board?
It is distributed to LV Distribution tables via energy panels. Electrical energy coming to places such as factories and workshops is directed to distribution tables via distribution boards. Thus, the energy of the entire facility can be controlled from a single panel. Values such as the mains voltage coming to the facility, the power and current drawn by the facility from the network can be read from these panels with the measuring instruments on them.
LV Panel Features
Distribution panels are the main unit in which a facility is energized. From this perspective; LV Distribution Panels keep all of the electrical energy in the facility under control. When the energy of any part of the facility needs to be cut off, this can be done in a short time by turning off the switch on the distribution panels. In a dangerous situation it is possible to de-energize the entire unit from here. It is also possible to read current and voltage information with the measuring instruments on it.
APEX GROUP; It allows the selection and production of the most accurate and cost-effective LV Panels by preparing the panel view, wiring and assembly drawings before production. In accordance with our service and quality policy, all productions are controlled and tested by our experienced engineers and technicians.
AG Panel Materials
AG panel materials are:
• Copper Busbars
• Switches
- Load Breaker (Main Switch): They are connected to the energy input of the main part of the distribution boards
and they keep the whole system under control.
- Compact Switches: Used as input and output switches in LV panels.
• Current Transformers: These are the transformers used for measuring the current passing through the primary from the secondary winding depending on the conversion ratio.
• Post Insulators: Post insulators used in panels are used to attach the busbars on the LV Panel body in isolation.
• Panel Internal Requirement Socket, Lamp and Fuse: If desired, a single phase socket connection and lighting lamp can be installed in the distribution panels.
Safety and Security Measures We Take as APEKS:
1. The bare parts carrying voltage in the main panel are protected against accidental touching.
2. If the live parts are not protected, a distance of at least 1 meter is left between the bare parts and the room boundary. If there is a bare part on both sides, the width of the intermediate place is designed as 2 meters.
3. An empty passageway of at least 90 cm is left in front of the panel.
4. A death hazard sign is hung on the panel.
5. All metal parts of the panel that do not have electricity are grounded.
6. The floor of the service passage behind the panel is covered with PVC.
7. In order to prevent the intervention of unauthorized persons, the panel cage lock is kept locked at all times.
