What is a Radom Heater (Deicing)?
It is a special product produced to prevent icing and to minimize data exchange by mounting on the front surface of radom heater antennas.
Product General Features:
In the middle section, no resistance is used to prevent signal pollution.
The outer frame is made of 304 stainless material and the protection class is IP 65.
Power consumption is kept to a minimum and low energy cost.
Radio Link Dish Deicing Heated Radom Systems
- Product; It is a chemical fluid structure that operates with 12 V DC and is produced to prevent icing by mounting on the front surface of the antenna (30-60-120cm).
- The front part of the radome is protected against icing by constantly recirculating the chemical through the channels in 12mm plexiglass.
- The system has a hysteresis value of 2°C and activates the resistance when the temperature drops below 3°C and turns off at 5°C and above.
- It has 2 relay outputs on the Temperature Indicator and the outputs are used to inform the remote monitoring units about the working status.
Radio Link Dish Antenna Heating Radom Systems
- The product is a resistance structure that works with 24 V AC and is produced to prevent icing by being mounted on the front surface of the antenna (30-60-120cm).
- The system has a hysteresis value of 2°C and activates the resistance when the temperature drops below 3°C and turns off at 5°C and above.
- It has 2 relay outputs on the Temperature Indicator and the outputs are used to inform the remote monitoring units about the working status.