Sequential Plug And Drive LPG Kit
It is generally used in 6 and 8 cylinder vehicles and OEM applications to keep emission values under control and to read and emulate different sensor values. It has 56 pin ECU and installation cable group. It is the indispensable choice of vehicle owners who want high performance as it reads the vehicle's original sensor values and reacts instantly with the appropriate strategy.

1. 1pc FLY SF ECU
2. 1 Genius MB regulator
3. 1pc ET98 LPG Gas Valve
4. LPG injector according to the number of 3, 4, 5, 6 or 8 cylinders
5. 1 temperature pressure sensor
6. 1pc FJ1 filter
7. 1pc Fuel selector switch
8. 1 x MAP sensor
9. Water hose
10. Gas hose
11. Injector and vacuum hose
12. 6. Mounting kit

Sequential Autogas Systems

These are the systems in which the first operation of the vehicle is made with gasoline and then automatically switches to gas when the engine temperature reaches 40°C. By measuring the amount of oxygen in the exhaust gases, the amount of fuel is regulated appropriately in the Regulator and injector with the help of the electronic control unit.

How to Make Sequential Autogas Conversion in Vehicles?

By bringing the gas in the LPG Tank to the engine section by pulling the fuel line, the Regulator converts the liquid gas under high pressure to the vapor phase. LPG coming out of the regulator in vapor phase is filtered and cleaned of impurities. Then, combustion is ensured by giving it to the cylinders by means of injectors.

After mechanical assembly, Calibration is done. Calibration is required for the system to activate. With the calibration, the LPG ECU memorizes all the operating parameters of the vehicle and creates the same gasoline map for LPG. Thus, there is no performance loss in the vehicle.

After calibration, the vehicle is ready to switch to gas.